An Oak Pallet is made from red or white oak trees. This oak pallet has a dense grain that resists wear. The product does not get dents from heavy steel parts. The wood has a light brown to dark tan color. Many auto part makers use this product for engine blocks and transmissions. The pallet stays flat under very heavy weight.
High Nail Holding Power
The product has very tight grain around each nail. The wood grips the nail so it does not back out. The product has a 2,500 kg static load capacity. The top has 7 boards that are 20 mm thick. The bottom has 5 boards that are also 20 mm thick. The product has steel reinforced stringers on the bottom. The steel straps run the full length of the pallet. The straps stop the oak from splitting.
Technical Data Table
|
Parameter |
Value |
|
Wood Type |
Red or white oak |
|
Static Load |
2,500 kg |
|
Board Thickness |
20 mm top and bottom |
|
Top Boards |
7 pieces |
|
Reinforcement |
Steel straps |
Good for Export to Europe
An product meets the ISPM 15 rules for heat treatment. This product has a kiln dried mark on the side. The product has no bark on any of its surfaces. The pallet has a 4-way entry for forklifts and jacks. The stringers have beveled ends for easy entry. The product comes in a 120 cm by 100 cm size. Buy this product for your heavy machinery parts. The oak will not let you down.
Hot Tags: oak pallet, China oak pallet manufacturers, suppliers, factory, Blue Pallets Wood, loading wooden pallet system, logistics chain pallet system, pallet for multi layer stacking, space saving wooden pallet, unloading wooden pallet system
