A Thin Pallet is a 60 mm-high wooden pallet used in shallow racks, battery and electronics storage, and display systems where vertical space is limited. It provides a conventional boarded pallet format with a lower body than standard warehouse pallets.
Core Advantages
60 mm Overall Height
The pallet has a 60 mm total height with 45 mm-high stringers. In shallow shelf systems or low-clearance storage positions, the reduced pallet height leaves more vertical space available for the product above the platform.
800 kg Load Capacity
The current technical table lists an 800 kg load capacity. For battery modules, electronics cartons, and compact industrial loads, this gives the low-profile platform a defined load range rather than limiting it to lightweight display use.
15 mm Deck Boards with 50 mm Nails
The current construction uses 15 mm boards and 50 mm nails, with two nails at each board end. Where short stringers reduce available nailing depth, the specified fastener length and joint pattern keep the deck connected without relying on oversized hardware.
Customization
Custom Thin Pallets
Thin pallet construction can be adjusted around rack opening, product footprint, and presentation requirements. The deck layout and stringer geometry are set so the pallet remains within the available height while still providing the contact area needed by the load.
Customizable Items
• Overall footprint
• Deck-board spacing
• Stringer spacing
• Edge chamfer
• Surface planing
• Paint or identification color
• Logo / stencil area
Quality Control
Total height and stringer height are checked during assembly because small dimensional changes matter in shallow rack openings. Boards are measured before nailing to prevent a single oversize member from raising the finished pallet above the approved profile.
Fastener placement is checked at each board end for penetration, splitting, and exposed points. Deck alignment and stringer straightness are inspected so the pallet does not rock or bind when inserted into a low-clearance position.
Final inspection covers flatness, surface smoothness, edge damage, and visible distortion. Sample load checks are completed against the approved order specification before release.
FAQ
Q: What is the lead time for custom thin pallets?
A: 30 days.
Q: What are the standard payment terms?
A: 30% deposit and 70% balance.
Q: How much does an unloaded pallet weigh?
A: 12 kg.
Q: How many boards form the top deck?
A: Five boards.
Hot Tags: thin pallet, China thin pallet manufacturers, suppliers, factory, fulfillment pallet system, interlocking wooden pallet, long lasting wooden pallet, solid deck wooden pallet, supply chain pallet system, weather resistant wooden pallet
