A Low Profile Pallet is a 40 mm-high pressed-wood platform designed for automated lines, robot cells, medical-device handling, and other systems with very limited vertical clearance. Its low body keeps the load close to the conveyor or transfer level where a conventional pallet would add too much height.
Core Advantages
40 mm Total Height
The pallet body is only 40 mm high. In robotic cells, low-transfer conveyors, and equipment with restricted infeed clearance, the reduced profile preserves vertical space for the product and lowers the overall unit-load height.
Solid Gap-Free Top Surface
The top is a continuous pressed surface with no deck-board gaps. For small cartons, trays, or components with narrow feet, full-surface contact prevents edges from dropping into deck openings and gives the load a continuous bearing area.
600 kg Load Capacity
The current technical table lists a 600 kg load capacity. In automated handling of medical devices, electronics, or compact industrial assemblies, the defined capacity supports a substantial load while retaining the thin 40 mm platform geometry.
Customization
Custom Low Profile Pallets
Low-profile designs can be adjusted around the transfer equipment, product footprint, and required contact surface. Because vertical clearance is limited, changes focus on the top geometry, edge treatment, bottom support pattern, and identification features rather than adding conventional deep stringers.
Customizable Items
• Overall footprint
• Top-surface texture
• Bottom skid layout
• Corner radius
• Surface coating
• Identification label area
• Edge profile
Pressed pallet bodies are checked for overall thickness, flatness, edge damage, and visible molding defects. The top surface is inspected for voids or raised areas that could interfere with small-footprint products.
Bottom support features are measured for consistent height and position so the pallet sits level on transfer equipment. Coated versions are checked for complete coverage and for buildup that could change the designed profile.
Final inspection confirms the pallet remains flat under the approved load condition and that corners, label areas, and handling surfaces are free from damage before stacking.
FAQ
Q: What is the minimum order quantity?
A: 200 pallets.
Q: How long does custom sample development take?
A: One week.
Q: What is the unloaded weight of one pallet?
A: 9 kg.
Q: What is the height of the bottom skid strips?
A: 10 mm.
Hot Tags: low profile pallet, China low profile pallet manufacturers, suppliers, factory, American Standard Pallets, Black Wood Pallet, custom size wooden pallet, European Standard Pallets, pallet for manual handling, Square Wood Pallet
